Algaecide for swimming pool

On top of keeping the right balance of chlorine level, adding solutions to clean the pool is equally essential to keep the pool clear and swimmable. As time passes, without proper and thorough cleaning, stains will occur regardless of any type of pool. Your pool may get a visit from mustard and green algae that make your pool water turn milky and not attractive for swimming.

Here’s the list of the cleaning heroes for your swimming pool and a peace of mind.

SWIMTRINE Plus+

• What-for: Prevent mustard & green algae
• How-to: Use Weekly
• Usage: Ratio 30 cc per 19 m³ (1.6 cc per m³)

*After adding the solution, do run the pool system for 1 turnover before using the pool.

POOLTRINE

• What-for: Two jobs done at the same time, eliminates green algae as it increases water clarity. Suitable with D.E filters.
• How-to: Use only when the water turns cloudy green and the pH level is only between 7.2-7.6. If more or less than that, make sure to adjust the pH value before applying the solution.
• Usage: Ration 300 cc per 19 m³ and run the filtration system for 24 hours

*After adding the solution, do run the pool system for 1 turnover before using the pool.

CLEARTRINE

• What-for: Coagulates dirt, oil and other organic causes of cloudiness. Suitable with Sand filters.
• How-to:
  • For very cloudy water apply 60 cc per 19 m³ then run the filtration system 20 hours until water become clear.
  • For maintenance use apply 30 cc per 19 m³ every 1-2 weeks.

*After adding the solution, do run the pool system for 1 turnover before using the pool.

STAINTRINE

• What-for: Prevent staining and scaling of pool surfaces and components by chelating minerals such as iron, calcium and manganese. (Some water contains higher level of minerals causing calcium and manganese when adding chlorine and makes it more difficult to clean.)
• How-to: Suitable with filling new water or adding more water into the pool. Apply within 1-2 days before adding chlorine.
• Usage: 225 cc per 19 m³ (12 cc per 1 m³)

*After adding the solution, do run the pool system for 1 turnover before using the pool.

BLACK ALGAETRINE

• What-for: The best available product for controlling black and green algae’s innate resistance to chemicals
• How-to: Use ever 5 days for 2-3 times until all black algae are gone, can use brush to help remove the algae
• Usages: With visible algae growth apply 180 cc per 19 m³ then next time apply 90 cc per 19 m³ (5 cc per 1 m³)

After adding the solution, do run the pool system for 1 turnover before using the pool.

SANITRINE

• What-for: Removes dirt, grime, grease and oils with ease, as it prevents odour and kills germs.
• How-to: Simply mix with water and wipe or scrub surface with damp cloth or mop.